[hpsdr] Ozy Problem

[Doug Bade]

***** High Performance Software Defined Radio Discussion List *****

Hello Folks;
   
    I have had an atom 330 based board (D945GCLF2) that has been 
limiting to 96k/1024  ever since I started using it...and I have been 
dragging my heals on doing the update due to otheres issues.... I 
finally did tonight and all went perfectly.. I fired mercury/penny/ozzy 
up on AM broadcast as I have no outside antenna farm here yet.. and AM 
broadcast is normal and clean. No audio distortion issues like before 
and I am able to run 192k/2048 settings which I have never been able to 
do.. CPU load is holding at 19-22% pretty steady.... I will let it run a 
while but looking like my boards are happy... I am running Ozy in slot 
1,  Penny in slot 3  and Mercury in slot 5 which is pretty much as I 
have been. I am not testing TX but have not been using TX to date....

Penny as my clock source...

My pwer supply is a M2-ATX board driven off an astron 13.8 supply. I am 
powering the Atlas off of one of the drive connectors with a home built 
adapter cable... The M2-ATX has been performing well with minimal 
induced switching noise...
No uglies here so far ....

Doug
KD8B

 1244159277.0