[hpsdr] Pennywhistle connection diagram...

[Graham / KE9H]

Pete:

You are correct.
The pin numbers are incorrect on page 5.
I'll revise in the next version of the manual.

Thanks,
--- Graham

==


n3evl wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> The connection diagram on page 5 of the Pennywhistle Assembly and 
> Operating Instructions document shows the 3-pin header numbers with 1 
> labeled as Bias Control and 2 labeled as ground.
> This appears to be at odds with the schematic which shows 1 ground and 
> 2 Bias Control.
>
> Since tests with my ohm meter agree with the schematic, it appears 
> that the connection diagram is incorrect.
>
> The last thing I have to do is wire up the control cable to this 
> header and the DB25 - want to make sure I have it correct.
>
> Pete, N3EVL
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>


 1258851288.0