[hpsdr] 700MHz Full Power Bandwidth S/H Ch 1

[Lester Veenstra]

Your request to the Hpsdr mailing list Posting of your message titled "RE:
[hpsdr] 700MHz Full Power Bandwidth S/H"

has been rejected by the list moderator.  The moderator gave the following
reason for rejecting your request:

"Your message was too big; please trim it to less than 12 KB in size."

 

Assuming you are sampling at 130 msps

You would be able to sample a signal up to ½ the sample rate, that is, the
first Nyquist region, from zero to 65 Mhz. ( reality, you would use a low
pass filter as an ANTI-ALIAS filter to prevent signals of from 65 MHz to 130
MHz, the second Nyquist,  from being ALIASED into  the baseband or first
Nyquist region. 

 

In a perfect world, is the input signal condition circuit will support the
frequency response, you can see what appear to be baseband signals out of
the A/D  up any N'th Nyquist region.

-----------end chap 1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 4306 bytes
Desc: not available
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20100830/7aafac2a/attachment-0004.bin>