[hpsdr] Metis Arrived & Works!

[Dan Mitchell]

Thanks, Bill.
The docs on my router say it's a duplex switch 10/100. It's a Netgear WGT624
(4-port). But I'll look closer today.
Dan

-----Original Message-----
From: Bill Tracey [mailto:bill at ewjt.com] 
Sent: Wednesday, February 16, 2011 9:52 PM
To: Dan Mitchell
Cc: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] Metis Arrived & Works!

Is your  'router' an Ethernet switch - or a hub.  If a hub it will 
not work with Metis - Metis requires a switch.

First step in debugging these things is to get a Wireshark 
(www.wireshark.org) capture so we can see if Metis is asking for an 
address and if the router is offering him one.

Regards,

Bill (kd5tfd)


At 11:28 PM 2/16/2011, Dan Mitchell wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>My Metis works well when connected directly to my computer, and runs well
in
>PowerSDR. However, when connected thru my 4-port router, it fails to be
>assigned an IP address by the DHCP in the router. The router sees the MAC
>address of the Metis for a period, but does not assign the IP address.
>Suggestions?
>Dan, W0IQ



 1297956589.0