[hpsdr] Metis Arrived & Works!

[Keith]

Hi Phil,

Metis is working fine here,  the processor use is down from when using Ozy,
Ozy was about 5-9% with Metis 2-5%. Thanks for the hard work you have put
into this project.

73

Keith N3ICK  

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Phil Harman
Sent: Wednesday, February 16, 2011 7:17 PM
To: Gordon & Lois Duff
Cc: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] Metis Arrived & Works!

***** High Performance Software Defined Radio Discussion List *****

Hi Gordon,

Glad to hear that Metis is working well for you. I've yet to implement the
"Full Spectrum" display in KK but will do shortly.

I'll add this to the next release that will also support PennyLane.

As Jeremy mentioned, Metis comes ready programmed with V1.0 so no need to
re-program it unless you want to experiment with John's HPSDR Programmer
application.

One thing the Beta testers found was that the CPU load running PowerSDR with
Metis compared with Ozy/Magister was significantly lower.

I'd be interested in your findings.

73 Phil...VK6APH


> ***** High Performance Software Defined Radio Discussion List *****
>
> Thanks to Phil and TAPR and all who contributed.  It is a great bunch 
> of people, all helpful to a fault.
>
>
>
> Sort of a quick start guide.  I think these are the appropriate steps 
> (they are in the manual, of course)
>
>
>
> 1.   Download the HPSDRProgrammer (see the Openhpsr.org downloads section
>
> 2.   If you are a windows user also download Winpcap as noted under
> HPSDRProgrammer section
>
> 3.   Download the Metis_V1.0.rbf ( as shown just below the HPSDRProgrammer
> info)
>
> 4.   Install the board with the appropriate jumper (J2).  J2 was installed
> by TAPR in my case.
>
> 5.   Run HPSDRProgrammer - a) discover (makes sure you are connected) and
> b)
> Program to load Metis rbf
>
> 6.  Start KISS Konsole - Ethernet version and away you go.  (I have 
> not tested PowerSDR yet)
>
>
>
> KISS seems to work fine.  However,  "Full Spectrum" does not seem to 
> be implemented.
>
>
>
> Thanks again to all.
>
>
>
> Gordon, KA2NLM
>
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


 1298054188.0