[hpsdr] programming penelope via METIS - fails

[Georg Prinz]

Hello Joe,

under win7 x64 I am able to update mercury via Metis. For Penlope I
succeeded with OZY, only. But, I am not able to run PowerSDR with OZY.
Metis works fine.

Georg, dl2kp



On Do, 2011-03-17 at 07:37 -0600, Joe Martin K5SO wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> Georg,
> 
> I, too, have trouble updating any boards via Metis with  
> HPSDRProgrammer, with the same symptoms as you describe.  I'm still  
> trying to discover why that might be but my work around is to use either
> 
> 1)  Quartus II Programmer with a byte blaster cable to directly load  
> the firmware on to the board, or
> 
> 2) Remove Metis, install Ozy, and use Ozy to update the firmware via  
> the Program-Mercury-EPCS16.bat or, in your case, Program-Penelope- 
> EPCS4.bat method as we normally do with Ozy.
> 
> Joe K5SO
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1300434483.0