[hpsdr] PowerSDR v2.2.3.dual_Mercury1 (K5SO 25SEP2011), Metis board not detected

[John Westmoreland]

Hello All,

My issue is a little more basic -

I have just got my chassis online (up, that is) - have updated Metis,
Mercury, and Pennylane the the latest firmware (via the HPSDR Programmer) -
but I cannot get Power SDR v2.2.3 to recognize Metis.
My PC can ping Metis just fine.

Any help appreciated.

73's,
John W.
AJ6BC


On Tue, Sep 27, 2011 at 6:06 AM, Joe Martin K5SO <k5so at valornet.com> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi Ted,
>
> First, keep in mind that the dual_Mercury1 program is a modification of
> Doug W5WC's PowerSDR v2.2.3 program.
>
> Before running the dual Mercury program you should be able to run Doug's
> program.  If you can't do that, the dual_Mercury1 program won't run either.
>  It sounds like your problem is not with anything to do with my dual_Mercury
> program but rather that you aren't able to run the basic PowerSDR v2.2.3
> program from which it derives, right?
>
>  If I correctly understand what you're saying,  you are unable to run ANY
> PowerSDR program on your XP machine with the Metis interface; thus we need
> to get you up and running with Metis on the XP first, then the problem
> you're having with PowerSDR v2.2.3 will likely disappear.
>
> Perhaps one of the Metis gurus can help us get you set up with the proper
> installations.  I happen to have .NET Framework SDK v1.1 installed on my
> machine.  I don't know if you need that, in particular, but I imagine that
> you are missing one such install or a critical driver perhaps.  I imagine,
> hearing your report, that you also are not able to run HPSDRProgrammer
> either on your XP machine with Metis, right?
>
> Rather than me stubble around with numerous suggestions for Ted to try, can
> anyone help us with a suggestion for Ted on getting his Metis interface
> problem straightened out?
>
> 73,  Joe K5SO
>
>
> On Sep 27, 2011, at 1:21 AM, VE7VIB wrote:
>
>  Hi Joe,
>>
>> I decided to jump into diversity radio magic with the second Mercury card.
>> I updated my Metis and Mercury boards to the latest status using Flynn
>> program for Mac.
>> Heterodyne works fine with one Mercury board at the time which means that
>> programming of all cards was successful.
>>
>> Now I installed Metis, one Mercury board on the XP machine, and I am
>> trying
>> to run your PowerSDR v.2.2.3. The problem is that the Metis board is not
>> recognized in the setup since the IP address are zeros.
>>
>> I run successfully HPSDR with the Ozy board on this XP machine in the
>> past.
>> What would cause Metis board not detected in your PowerSDR software?
>>
>> 73, Ted VE7VIB
>>
>>
> ______________________________**_________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/**
> listinfo.cgi/hpsdr-openhpsdr.**org<http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/**pipermail/hpsdr-openhpsdr.org/<http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20111025/be3de814/attachment-0003.htm>