[hpsdr] PowerSDR v2.2.3.dual_Mercury1 (K5SO 25SEP2011), Metis board not detected

[John Westmoreland]

Hello Again,

I am running Vista-64 on my shack machine - forgot to mention that.

I have played with my Norton 360 firewall settings; including temporarily
suspending it; with the same result - Metis isn't found.

73's,
John W.
AJ6BC

On Tue, Oct 25, 2011 at 3:51 AM, John Westmoreland <
john at westmorelandengineering.com> wrote:

> Hello All,
>
> My issue is a little more basic -
>
> I have just got my chassis online (up, that is) - have updated Metis,
> Mercury, and Pennylane the the latest firmware (via the HPSDR Programmer) -
> but I cannot get Power SDR v2.2.3 to recognize Metis.
> My PC can ping Metis just fine.
>
> Any help appreciated.
>
> 73's,
> John W.
> AJ6BC
>
>
> On Tue, Sep 27, 2011 at 6:06 AM, Joe Martin K5SO <k5so at valornet.com>wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> Hi Ted,
>>
>> First, keep in mind that the dual_Mercury1 program is a modification of
>> Doug W5WC's PowerSDR v2.2.3 program.
>>
>> Before running the dual Mercury program you should be able to run Doug's
>> program.  If you can't do that, the dual_Mercury1 program won't run either.
>>  It sounds like your problem is not with anything to do with my dual_Mercury
>> program but rather that you aren't able to run the basic PowerSDR v2.2.3
>> program from which it derives, right?
>>
>>  If I correctly understand what you're saying,  you are unable to run ANY
>> PowerSDR program on your XP machine with the Metis interface; thus we need
>> to get you up and running with Metis on the XP first, then the problem
>> you're having with PowerSDR v2.2.3 will likely disappear.
>>
>> Perhaps one of the Metis gurus can help us get you set up with the proper
>> installations.  I happen to have .NET Framework SDK v1.1 installed on my
>> machine.  I don't know if you need that, in particular, but I imagine that
>> you are missing one such install or a critical driver perhaps.  I imagine,
>> hearing your report, that you also are not able to run HPSDRProgrammer
>> either on your XP machine with Metis, right?
>>
>> Rather than me stubble around with numerous suggestions for Ted to try,
>> can anyone help us with a suggestion for Ted on getting his Metis interface
>> problem straightened out?
>>
>> 73,  Joe K5SO
>>
>>
>> On Sep 27, 2011, at 1:21 AM, VE7VIB wrote:
>>
>>  Hi Joe,
>>>
>>> I decided to jump into diversity radio magic with the second Mercury
>>> card.
>>> I updated my Metis and Mercury boards to the latest status using Flynn
>>> program for Mac.
>>> Heterodyne works fine with one Mercury board at the time which means that
>>> programming of all cards was successful.
>>>
>>> Now I installed Metis, one Mercury board on the XP machine, and I am
>>> trying
>>> to run your PowerSDR v.2.2.3. The problem is that the Metis board is not
>>> recognized in the setup since the IP address are zeros.
>>>
>>> I run successfully HPSDR with the Ozy board on this XP machine in the
>>> past.
>>> What would cause Metis board not detected in your PowerSDR software?
>>>
>>> 73, Ted VE7VIB
>>>
>>>
>> ______________________________**_________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/**
>> listinfo.cgi/hpsdr-openhpsdr.**org<http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/**pipermail/hpsdr-openhpsdr.org/<http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20111025/4882642a/attachment-0004.htm>