[hpsdr] Penny V1.4 firmware issue (tracked down problem but not sure where to go next)

[Paul Fletcher]

Hi Joe,

The mic is plugged directly into Penny[lane] in both cases so that's not the 
problem unfortunately. The problem definitely appears on V1.4 (incidentally 
I'm using a PC type headset that needs the bias on and I don't have a 
hardware PTT connected)

Regards,
Paul.

----- Original Message ----- 
From: "Joe Martin K5SO" <k5so at valornet.com>
To: "Paul Fletcher" <paul_fletcher at me.com>
Sent: Monday, September 19, 2011 8:55 PM
Subject: Re: [hpsdr] Penny V1.4 firmware issue (tracked down problem but not 
sure where to go next)


> Hi Paul,
>
> FYI, I am using Penny firmware v1.4 and Metis v1.4 without any problem  at 
> all with Tx audio on Penelope with my PSDR v1.19.3.5.steering1  version. 
> The PSDR version I'm using is based on Doug W5WC's PSDR  v1.19.3.5, of 
> course, and the Tx portions of the code are identical.  If Penny v1.4 were 
> at fault it seems to me that others (me included)  would be complaining 
> about Tx audio issues with it, which we aren't;  but perhaps you are 
> routing your Tx audio differently than most users.
>
> Do you run your Tx audio directly into the input jack on Penny?  If  not, 
> I suggest you try it as a test.
>
> If that's good then there's something awry with the alternate Tx audio 
> path and selections you are trying to use somehow.  We can track this 
> down, of course, and maybe there is something quirky in the firmware  that 
> prevents you from doing what you normally used to do even though  my 
> initial thought is that the firmware is probably okay.  I've been  wrong 
> at least once before, hihi.
>
> 73,  Joe K5SO
>
>
>
>
> 


 1316462462.0