[hpsdr] Penny V1.4 firmware issue (tracked down problem but not sure where to go next)

Scott Cowling scotty at tonks.com
Mon Sep 19 17:45:06 PDT 2011


Hi Paul,

What PC (CPU type/speed/memory size) are you using?

73,
Scotty WA2DFI

At 21:01 2011-09-19 +0100, Paul Fletcher wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>Hi Joe,
>
>The mic is plugged directly into Penny[lane] in both cases so that's 
>not the problem unfortunately. The problem definitely appears on 
>V1.4 (incidentally I'm using a PC type headset that needs the bias 
>on and I don't have a hardware PTT connected)
>
>Regards,
>Paul.
>
>----- Original Message ----- From: "Joe Martin K5SO" <k5so at valornet.com>
>To: "Paul Fletcher" <paul_fletcher at me.com>
>Sent: Monday, September 19, 2011 8:55 PM
>Subject: Re: [hpsdr] Penny V1.4 firmware issue (tracked down problem 
>but not sure where to go next)
>
>
>>Hi Paul,
>>
>>FYI, I am using Penny firmware v1.4 and Metis v1.4 without any 
>>problem  at all with Tx audio on Penelope with my PSDR 
>>v1.19.3.5.steering1  version. The PSDR version I'm using is based 
>>on Doug W5WC's PSDR  v1.19.3.5, of course, and the Tx portions of 
>>the code are identical.  If Penny v1.4 were at fault it seems to me 
>>that others (me included)  would be complaining about Tx audio 
>>issues with it, which we aren't;  but perhaps you are routing your 
>>Tx audio differently than most users.
>>
>>Do you run your Tx audio directly into the input jack on 
>>Penny?  If  not, I suggest you try it as a test.
>>
>>If that's good then there's something awry with the alternate Tx 
>>audio path and selections you are trying to use somehow.  We can 
>>track this down, of course, and maybe there is something quirky in 
>>the firmware  that prevents you from doing what you normally used 
>>to do even though  my initial thought is that the firmware is 
>>probably okay.  I've been  wrong at least once before, hihi.
>>
>>73,  Joe K5SO
>>
>>
>>
>>
>
>_______________________________________________
>HPSDR Discussion List
>To post msg: hpsdr at openhpsdr.org
>Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>HPSDR web page: http://openhpsdr.org
>Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1316479506.0


More information about the Hpsdr mailing list