[hpsdr] Help needed with Penelope Programming

[John Melton]

Have you removed all other cards leaving just Metis and Penelope on the 
Atlas bus and that the cards are in adjacent slots?

-- John g0orx/n6lyt

On 18/04/12 22:53, Frances Mercer wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
>
> Have tried unsucessfully to program the penelope board several times 
> and get the following messages
> File read successful
> programming device goes up to 80 %
> then I get the following error message
> Erase time out  Power cycle and try again.
> Using the jtag programmer for the boards with the latesst version for
> metis. Able to program the mercury board with no issues.
> What else do I need to try or do. Help would be appreciated
> Connie  NG4C
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20120419/b35f5db4/attachment-0004.htm>