[hpsdr] Alex - Suggested BNC Connector Strain Relief

[Giovanni Santin]

This is a problem, and not only for alex, but also for mercury and pennylane. Best solution should be, in my opinion, to use elbow shaped bnc with a panel locking nut in the front, as in the following catalog 

http://www.binbin.net/compare/dual-vertical-bnc-socket-(rc).htm

Locking all the connectors to a metal plane will also greatly improve the rf shielding. 
Problem is: how to remove the existing bnc without damaging the pc boards ?

73, Giovanni, IZ0SQZ
-----Original Message-----
From: John Westmoreland <john at westmorelandengineering.com>
Sender: hpsdr-bounces at lists.openhpsdr.orgDate: Tue, 27 Mar 2012 00:11:29 
To: HPSDR<hpsdr at openhpsdr.org>
Subject: [hpsdr] Alex - Suggested BNC Connector Strain Relief

***** High Performance Software Defined Radio Discussion List *****



 1332836798.0