[hpsdr] Alex - Suggested BNC Connector Strain Relief

[Hermann]

Why not use SMA connectors together with, e.g. RG-174 ?

73, Hermann

DL3HVH


On Tue, Mar 27, 2012 at 10:26 AM, Giovanni Santin <gsantin at mclink.it> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> This is a problem, and not only for alex, but also for mercury and
> pennylane. Best solution should be, in my opinion, to use elbow shaped bnc
> with a panel locking nut in the front, as in the following catalog
>
> http://www.binbin.net/compare/dual-vertical-bnc-socket-(rc).htm
>
> Locking all the connectors to a metal plane will also greatly improve the
> rf shielding.
> Problem is: how to remove the existing bnc without damaging the pc boards ?
>
> 73, Giovanni, IZ0SQZ
> -----Original Message-----
> From: John Westmoreland <john at westmorelandengineering.com>
> Sender: hpsdr-bounces at lists.openhpsdr.orgDate: Tue, 27 Mar 2012 00:11:29
> To: HPSDR<hpsdr at openhpsdr.org>
> Subject: [hpsdr] Alex - Suggested BNC Connector Strain Relief
>
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20120327/d5593edc/attachment-0004.htm>