[hpsdr] Hermes/ANAN-10 RX spurious signals?
Berndt Josef Wulf
wulf at ping.net.au
Sun Nov 18 15:57:07 PST 2012
G'day Dick,
can you post us some pictures?
73, Berndt
VK5ABN
On Sun, 2012-11-18 at 13:21 -0500, Dick Lichtel wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> I didn't take any pics but the implementation is pretty simple.
>
> Materials: Brass Shim sheet from Ace hardware , though pretty much
> anything that can be soldered to can work.
> Solder wick braid, used to ground the shield.
> Double sided tape, used to support/insulate the shield.
>
> I cut a piece of brass to fit over the 10 MHz area, it sits on top of
> the jumpers. There isn't any need to cut holes in the shield, its just
> a rectanglar piece.
>
> With the board positioned with the 10MHz SMA jack(J25) facing up, the
> shield fits between J8/J9 (doesn't cover those jacks) on the left
> extends to J24 on the right (J24 is covered) . It rests on the J16 leads
> at the top and covers the 122 Mhz Osc at the bottom. I soldered a
> piece of braid from to the alignment hole on next to the 10MHz SMA jack
> (J25) to the shield. The connection to ground should be as short as
> possible.
>
> All the jumpers/leads in the area (J20/J22/J23/J24 and the leads on J16)
> should be covered with tape. There is a small piece of tape placed on
> the 122 MHz for support on the bottom left corner. For the bottom right
> corner, there is stack of double sided tape. For the stack of tape, I
> didn't peal off the covering, so it doesn't leave sticky stuff on the
> caps & resistors.
>
> With the shield in place, the 10Mhz spur + harmonics are completely gone.
>
>
> Dick KD4JP
>
> I have not found any means to reduce the 24.5Mhz spurs. I think this
> will require some support from Apache Labs.
>
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
1353283027.0
More information about the Hpsdr
mailing list