[hpsdr] 10 Mhz Input Jack

[Bruce Beford]

Not a menu entry, but you must set the appropriate jumpers on the board to
disable the on board clock an enable the external jack. See the Hermes
operating manual. As these jumpers are not accessible once in an enclosure
like the ANAN-10, I intend to add a toggle switch to mine to be  able to
easily switch back and forth.
73,
Bruce, N1RX

> To use the 10 Mhz external clock jack on the back of Hermes - is
> there any special menu settings needed to activate it?  I have a GPS
> Clock receiver with a 10 Mhz output.  Have the TAPR Hermes board
> and Anan-10 PA and enclosure.  Using version .21 PowerSDR (W5WC)
> Hermes 1.8




 1354057643.0