[hpsdr] Updates to the skimmer server interface DLL

[k3it]

HermesIntf.dll Version "13.8.23" has been uploaded with the these changes:

"AGC": In case of an ADC overflow  the step attenuator is incremented by
one db every 100ms until the overload goes away or we run out of the
attenuation range.   In the absence of overload the attenuator is decreased
1db every 10s, until it's back to zero or the overflow bit re-appears. In a
high power environment the ATT will "teeter" +/-1db every 10s...  ( I
wonder if there is a better way to do this :)

- Samples with the PTT bit ON are not sent the skimmer and the ADC overflow
is ignored.  This prevents the skimmer from starting too many threads and
trying to decode junk. also keeps CPU and memory consumption under control.
 If you TX on another radio while the skimmer server is running, you can
tie its PTT-out to pin 26 on the Hermes J16 connector.

- fixed an issue with discovering radios connected to a "non-default"
network card.

- probably broke something else.

https://sourceforge.net/projects/hermesintf/



73
Vasiliy K3IT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130823/08d78fcc/attachment-0003.htm>