[hpsdr] Hermes Firmware update failed

Ken N9VV n9vv at wowway.com
Fri Jan 11 06:05:36 PST 2013

Just loaded 2.2rbf on my ANAN-10 and everything worked perfectly.
The rig is now online with QtRadio
http://qtradio.napan.ca/qtradio/qtradio.pl running on a Linux Mint 
(Cinnamon) 14.x Linux mITX box.

No loading problems. No glitches. Everything on a UPS in the shack.

GL de Ken N9VV

On 1/11/2013 7:23 AM, Bruce Beford wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> Bob,
> It sounds like you will have to use the bootloader mode to load the
> firmware. See appendix A of the Hermes manual. You will need to fit a jumper
> at JP12, and use the bootloader tab in HPSDR Programmer.
> FWIW, My Hermes updated fine, but My Metis gagged on the update. Once I used
> the bootloader mode the recover and reload the EEPROM, it's now fine.
> GL,
> Bruce, N1RX
>> I downloaded the new 2.2 Firmware for Hermes this morning, fired up the
>> HPSDR Programmer (v1.6), selected Hermes, discovered my rig, browsed to
>> and selected the v2.2 firmware file.
>> The activity window indicated that it verified the new firmware file,
>> erased the existing code successfully and said programming.
>> 20 minutes later there had still been no change in the display...
>> I restarted the HPSDR Programmer and it can no longer discover the Hermes
>> board.
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

Skype ID "Apache-Labs"


More information about the Hpsdr mailing list