[hpsdr] TX transient Hermes

[FRANCIS CARCIA]

Hi All,
When Hermes is set at a very low TX output level there is a transient generated when going into RX. The best way to avoid this is to use an attenautor at  the output and run a higher TX output setting. I noticed the transient while in two tone test mode with the output setting below 10. I don't see this as a problem but it is there if you have excessive gain after Hermes. Frank WA1GFZ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130304/27555de0/attachment-0002.htm>