[hpsdr] powering up homebrewed hermes.
k3it
gokoyev+k3it at gmail.com
Sat May 25 09:09:32 PDT 2013
Sorry I should have looked closer before asking... I mounted u6 and u7
wrong... and U25. I feel dumber than usual today.
The good news is the FPGA is not upside down :)
On Sat, May 25, 2013 at 9:09 AM, k3it <gokoyev+k3it at gmail.com> wrote:
> Hi all
>
> I'm going through some initial checks on the newly built Hermes and (no
> firmware or bootloader yet) and need some help.
>
> Is it OK for the 5V output to drop down to 4.6V under the load? I'm
> getting 485 mA through the J26 jumper and good voltages from u27-u32
> regulators, but not sure if the sag is normal.
>
> Another problem is on the 12v rail. Connecting 2 and 3 on J17 makes the
> regulator too hot to touch. There is 3.9 kOhm between J17 pin 2 and 3.
>
> Does that sound right?
>
> 73
> Vasiliy K3IT
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130525/5bb8361c/attachment-0004.htm>
More information about the Hpsdr
mailing list