[hpsdr] PowerSDR OpenHPSDR mRX-FFT v. 3.1.5 (6/23/13) level calibration

[georg Prinz]

Hi Joe,

thank You for Your help. After deleting the *xml file, it is working fine.
But what does the item "Limit Stiched Receivers" mean?
Please, be so kind to give me a short note, when the triple mercury 
program is running.
73, Georg - dl2kp



Am 13.10.2013 15:35, schrieb Joe Martin K5SO:
> Hi Georg,
>
> 1)  Try changing your sampling rate in Setup > Audio and then do your 
> level calibration.  If that doesn’t work simply delete your 
> database.xml file and let the program build a new one for you.
>
> 2) The “update" of the program is likely to be the PowerSDR mRX 
> program.  If you do not wish to use “stiching” of the receivers then 
> check the 1-Receiver box in Setup > General > Limit Stitched 
> Receivers.  PowerSDR mRX v3.1.5 (6/23/13) works fine here as it 
> apparently does at your QTH too.
>
> 3) The triple Merc program also gives me errors here.  I will look 
> into that to see what’s going on there.  Thanks for the feedback.
>
> 73,  Joe K5SO
>
> On Oct 13, 2013, at 7:07 AM, georg Prinz wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> Hello everybody,
>>
>> after long time I activated my hpsdr system and updated whole 
>> firmware: Metis v. 2.6, Mercury 1,2 and 3 v. 3.4 and
>> Penny version 1.8. PowerSDR OpenHPSDR mRX-FFT v. 3.1.5 (6/23/13).
>>
>> 1.) Frequency calibration went without any problem, but level 
>> calibration is not possible. At all signal levels I get following 
>> error: "Peak is less than 30dB from the noise floor, use larger 
>> signal. Even -10dBm does not change anything.  The noise floor is at 
>> about -130dB.
>>
>> 2. PowerSDR_RX2_v2.2.14.0_(W5WC) does not work with the newest 
>> firmware version. Will there be a update of this program? 
>> <http://svn.tapr.org/repos_sdr_hpsdr/trunk/W5WC/PowerSDR_Installers/PowerSDR_RX2_v2.2.14.0_%28W5WC%29_Setup.msi>
>>
>> 3. PowerSDR v2.2.3.triple_Mercury (K5SO 4DEC2011) 
>> <http://www.k5so.com/psdr_v2.2.3_triple_Mercury.zip>I get various 
>> errors at PowerSDR.Console.UpdateVFOAFreq(String freq) and 
>> PowerSDR.Console.Main(String[] args).
>>
>> Any suggestions?
>>
>> Vy73, Georg, dl2kp
>>
>


-- 


Internet: in progress
**********************************************************************

IMPORTANTE/IMPORTANT                      CONFIDENCIAL/CONFIDENTIALITY

Este mensaje ha sido elaborado únicamente para uso de la persona
o entidad a la que es remitido, ya que puede contener información
personal, confidencial y de acuerdo a ley no puede ser difundido.
Si el lector de este mensaje no es el destinatario señalado, o la
persona responsable para entregar el mensaje a quien está dirigido,
advertimos que cualquier divulgación, retransmisión o copia de
esta comunicación esta estrictamente prohibida. Si usted ha recibido
esta comunicación por error, por favor sírvase informarlo de
inmediato al remitente por correo electrónico o teléfono y borrar
inmediatamente el mensaje original.
    

This e-mail may contain confidential and/or privileged
information. If you are not the intended recipient (or have
received this e-mail in error) please notify the sender
immediately and destroy this e-mail. Any unauthorized copying,
disclosure or distribution of the material in this e-mail is
strictly forbidden.

Diese E-Mail kann vertrauliche und/oder rechtlich geschuetzte
Informationen enthalten. Wenn Sie nicht der richtige Adressat
sind oder diese E-Mail irrtuemlich erhalten haben, informieren
Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser
Mail ist nicht gestattet.
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20131013/83d044f3/attachment-0004.htm>