[hpsdr] PureSignal with Anan-10

Barry N1EU n1eu.barry at gmail.com
Sat Feb 1 07:43:25 PST 2014


Ken, did you go through the ATT level setting routine on your ANAN-10?
Merely enabling PureSignal on my ANAN-10 without doing anything else
results in no observable change in 2-tone output spectrum.

73, Barry N1EU


On Sat, Feb 1, 2014 at 2:20 PM, Ken N9VV <n9vv at wowway.com> wrote:

> Hi Jeff,
> I have an ANAN-10 and have tried to get PureSignal to show me a green
> LEVEL light without any luck. I can't get enough feedback into the XVRT RX
> SMA connection on the back.
>
> *HOWEVER* if you turn on a 2-tone test and turn on Adaptive Pre-Distortion
> (PureSignal) you WILL SEE A DRAMATIC IMPROVEMENT.
>
> Run some tests with PureSignal ON and I bet you will be very pleasantly
> surprised.
>
> The PureSignal Team is aware of the ANAN-10 feedback path and there may be
> some new firmware to help us reach a better feedback level. VK6PH announced
> on Teamspeak last night that he was working on a new firmware rbf file that
> will also work with cuSDRxx.
>
> Hang in there - your ANAN-10 will show at least a 40db improvement in 3rd,
> 5th and 7th order harmonics (the harmonics are odd because the Hermes is
> designed a balanced 2 FET final and cancels out the even harmonics <g>).
>
> GL de N9VV
>
>
>
> On 2/1/2014 8:03 AM, Jeff Kelly wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>>
>>
>> I think I am confused - does PureSignal work with the Anan-10?
>> The Anan-10 doesn't have the EXT 2 or EXT 1 BNC's.
>> And I can't seem to find any Alex controls on PowerSDR for RX1 or RX2 in
>> on TX.
>> Hopefully I am just doing something wrong Smile
>> Any direction would be most helpful.
>> Thank you,
>> Jeff
>> K2SDR
>>
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/
>> listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
>>
> --
> +°´°+,¸¸,+°´°~ ~°´°+,¸¸,+°´°+
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20140201/1c5fe0f0/attachment-0004.htm>


More information about the Hpsdr mailing list