[hpsdr] Angelia_v2.5 and PowerSDR_mRX_PS_RA v3.2.8 (1Feb2014)

[Joe Martin K5SO]

Mike, 

RR, understood.  Unfortunately I don’t actually have an ANAN-100D to enable me to work effectively on this particular Tx issue for you.  Doug does however so I’m confident that he’ll take a peek when he gets a moment to do so.  

Thanks for the feedback! 

73,  Joe K5SO

On Feb 2, 2014, at 11:47 AM, mstangelo at comcast.net wrote:

> Joe,
> 
> Thanks for the fast turnaround!
> 
> I upgraded to Angelia_v2.5 firmware and to this new version of PowerSDR_mRX_PS_RA
> 
> Again, the HPSDR Programmer successfully erased the old firmware but failed to upgrade the software so I had to use the Bootloader with J17 shorted.
> 
> I had the same issue I had with firmware 2.2; low power output, about 65 watts, on 10 and 12 meters. The power is correct at the 10 and 50 watt levels but I cannot get more that 65 watts out with the lowest PA Setings Gain.
> 
> Is anyone else experiencing this? I believe this occrued with earlier firmware. It had to do with with a mismatch with the LP filter switched in for these bands.
> 
> Mike N2MS
> 
> ----- Original Message -----
> From: Joe Martin K5SO <k5so at valornet.com>
> To: hpsdr at lists.openhpsdr.org list <hpsdr at lists.openhpsdr.org>
> Sent: Sun, 02 Feb 2014 15:11:54 -0000 (UTC)
> Subject: [hpsdr] Angelia_v2.5 and PowerSDR_mRX_PS_RA v3.2.8 (1Feb2014)
> 
> ***** High Performance Software Defined Radio Discussion List *****
> 
> 
> All, 
> 
> Angelia_v2.5 firmware and a new version of PowerSDR_mRX_PS_RA is available for download from 
> 
> http://k5so.com/HPSDR_downloads.html
> 
> The Angelia firmware fixes the Rx5 bug for Angelia, the same bug that Phil mentioned as now being fixed in Hermes firmware, and fixes a bug that showed up when in Diversity mode.  The new PowerSDR mRX PS RA software fixes bugs that were associated with filter and attenuator settings when running in ANAN-100D or Orion modes and Diversity mode operations.  
> 
> The new PowerSDR mRX PS RA software permits one to operate using PureSignal, Diversity, and RA simultaneously if you choose to do so.  My thanks to Doug W5WC for the basis PowerSDR code and for the testers that helped identify bugs for us to fix.  
> 
> 73,  Joe K5SO
> 


 1391370213.0