[hpsdr] Angelia_v2.7 firmware ... "fix" for using ANAN-100D with HPSDR Programmer

[dl8laq at sh-home.de]

dl8laq at sh-home.de schrieb: 

Forget my note about the switch!!! Programmer can flash also via switch!!! 

> ***** High Performance Software Defined Radio Discussion List ***** 
> 
> Hi Joe,  
> 
> I did a longer test:  
> 
> Direct connection via LAN from Angelia to pc. Programmer doesn't work via 
> my switch (gigabit switch ZyXel GS-105b V2).
> cuSDR & PSDR are working fine
> Programmer V2 nopcap (2.0.4.5) can erase flash and program 2.7 into 
> Angelia, Angelia is up and running  
> 
> And now update to 2.8 from installed 2.7
> Programmer 2.0 discovers Angelia with 2.7
> Erasing flash, waiting for >3 minutes, no programming
> PSDR cannot connect to Angelia  
> 
> Used boot loader to install 2.8 again, Angelia is up and running  
> 
> Programmer flashed 2.0a into Angelia
> 2.0a and 3.2.1 are doing something, but not very nice :-)
> Programmer cannot flash back to 2.8, used bootloader instead
> Angelia is up and running  
> 
> A 2nd try with programmer from 2.7 to 2.8 failed!  
> 
> 73, Norbert  
> 
> Joe Martin K5SO schrieb:  
> 
>> ***** High Performance Software Defined Radio Discussion List *****  
>> 
>> If anyone else who is experiencing that Angelia_v2.7 does not work 
>> properly with HPSDR Programmer can do the test below for me I’d 
>> appreciate hearing of the result, as I can’t reproduce the problem here 
>> but would like to know if HPSDR Programmer works for you when 
>> Angelia_v2.8 is in your ANAN-100D.  
>> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

 1391875310.0