[hpsdr] No modulation from Penelope.

[georg Prinz]

Hi Kjell and all,

that is curious, because on my penelope both jumpers J10 and J11 are set 
and everything is
performing without any problems.

73, Georg, DL2KP



Am 27.02.2014 09:48, schrieb Kjell Karlsen:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi all.
>
> Thank you all for different suggestions!
>
> The problem was solved by Dough, W5WC (as usual)!
>
> It seems as I have missed (or forgotten)some information. I think I 
> was told some time ago that the I2C jumpers on Penelope should be 
> removed due to some changes on the Atlas bus. I did this on both of my 
> Penelope boards. When they was reinstalled, Penny works OK.
>
> 73, Kjell.
>
>
>>
>> On 2/26/2014 9:03 AM, Kjell Karlsen wrote:
>>> ***** High Performance Software Defined Radio Discussion List *****
>>>
>>> Hi all.
>>>
>>> I have tested my "old" OpenHPSDR transceiver with Metis, Mercury, 
>>> Penelope and Munin installed. Everything is working OK except when I 
>>> try to modulate, nothing is coming out of Penelope. I can use the 
>>> 2-tone generator to set the Gain By Band in a normal way, if I use 
>>> TUNE, there is a carrier, if I select AM and push PTT, there is a 
>>> carrier with correct level but no modulation. In SSB, when using 
>>> PTT, I see nothing on the spectrum monitor.
>>>
>>> I have updated the firmware in all units to the latest (Metis v2.6b, 
>>> Mercury v3.4, Penelope v1.8.) PSDR is mRX PS v3.2.9 (2/23/14) And 
>>> Yes, I deleted .......
>>>
>>> Georg, DL2KP reported the same problem to me when I asked. When he 
>>> tried to use Setup, Hardware Config, Orion Hardware setup and 
>>> selected PTT ON, he get normal modulation. After that, all is OK on 
>>> his transceiver. I have also tried this but it is not working here. 
>>> I have tested both of my Penelope units.
>>>
>>> ??????
>>>
>>> 73, Kjell
>>>
>>
>>
>> ---
>> This email is free from viruses and malware because avast! Antivirus 
>> protection is active.
>> http://www.avast.com
>>
>>
>
>


-- 


Internet: in progress
**********************************************************************

IMPORTANTE/IMPORTANT                      CONFIDENCIAL/CONFIDENTIALITY

Este mensaje ha sido elaborado únicamente para uso de la persona
o entidad a la que es remitido, ya que puede contener información
personal, confidencial y de acuerdo a ley no puede ser difundido.
Si el lector de este mensaje no es el destinatario señalado, o la
persona responsable para entregar el mensaje a quien está dirigido,
advertimos que cualquier divulgación, retransmisión o copia de
esta comunicación esta estrictamente prohibida. Si usted ha recibido
esta comunicación por error, por favor sírvase informarlo de
inmediato al remitente por correo electrónico o teléfono y borrar
inmediatamente el mensaje original.
    

This e-mail may contain confidential and/or privileged
information. If you are not the intended recipient (or have
received this e-mail in error) please notify the sender
immediately and destroy this e-mail. Any unauthorized copying,
disclosure or distribution of the material in this e-mail is
strictly forbidden.

Diese E-Mail kann vertrauliche und/oder rechtlich geschuetzte
Informationen enthalten. Wenn Sie nicht der richtige Adressat
sind oder diese E-Mail irrtuemlich erhalten haben, informieren
Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser
Mail ist nicht gestattet.
**********************************************************************


---
Diese E-Mail ist frei von Viren und Malware, denn der avast! Antivirus Schutz ist aktiv.
http://www.avast.com


 1393494077.0