[hpsdr] Hermes 144mhz

[Phil Harman]

Hi Bent,

I use and openHPSDR Penelope board as the basis of the VK6RIO 2m Chirp
beacon  by taking the RF directly from the ADC output then filtering and
amplifying it - works really well.

73 Phil...VK6PH


> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi Bent,
>
> it is NOT possible run Hermes in 3rd Nyquist zone without major mods at
> the
> filtering. I modified an Atlas-based HPSDR setup for 144 Mhz.
> Undersampling
> works also on VHF with good performance (details under
> http://www.hamsdr.com/dnld.aspx 9/19/2013)
>
> 73, Helmut, DC6NY
>
>
> -----Ursprüngliche Nachricht-----
> Von: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] Im Auftrag von Bent
> Andersen
> Gesendet: Dienstag, 9. September 2014 19:15
> An: hpsdr at lists.openhpsdr.org
> Betreff: [hpsdr] Hermes 144mhz
>
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>



 1410326921.0