[hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

[Joe Martin]

Okay, thanks.  Working on it. 

On Dec 8, 2015, at 7:30 PM, Brian D wrote:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> In my setup ADC2 is selected for RX2, but I also always have to cycle RX2 on
> and off before diversity will work.
> 
> 
> Joe Martin <k5so at k5so.com> wrote:
> 
>> ***** High Performance Software Defined Radio Discussion List *****
>> 
>> Scott,
>> 
>> Thanks.  That’s not my experience at all.  I normally have ADC2 selected
>> for RX2 in the Setup > ADC menu as my default and never have to touch the
>> RX2 button to bring up Diversity mode.
>> 
>> I wonder if you were to set the ADC assignment as above then exit HPSDR
>> PowerSDR so that the new setting gets written into the database.xml file,
>> then bring up HPSDR PowerSDR again if you still need to use the RX2 button
>> to bring up Diversity mode when running HPSDR PowerSDR?
>> 
>> 73, Joe K5SO
>> 
>> On Dec 8, 2015, at 9:23 AM, Scott Traurig wrote:
>> 
>>> Joe,
>>> 
>>> I can confirm the requirement to cycle RX2 before diversity will work.
>>> It has been like this for many versions now. If RX2 is not cycled, with
>>> diversity enabled selecting RX2 in the diversity control panel shows the
>>> output of RX1 in the spectral display. It's almost as if diversity does
>>> not know to use ADC2 for RX2 until RX2 has been cycled on to off at
>>> least once.
>>> 
>>> 73,
>>> 
>>> Scott/w-u-2-o
>> 
>> _______________________________________________ HPSDR Discussion List To
>> post msg: hpsdr at openhpsdr.org Subscription help:
>> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org HPSDR web
>> page: http://openhpsdr.org Archives:
>> http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>> 
>> 
> 
> 
> -- 
> Brian Duffell 
> G3VGZ G8AOE
> Yarm on Tees 
> England