[hpsdr] Microphone doesn't work in PS v3.3.9 using VAC1

[Bryan Rambo]

Have you tried un-checking the "Allow PTT to override/bypass VAC for Phone" box?
 
73, Bryan W4WMT

  _____  

From: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Amogh Desai
Sent: Tuesday, November 22, 2016 6:25 AM
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] Microphone doesn't work in PS v3.3.9 using VAC1


Hi, 

I am using a Hermes-Lite transceiver <https://github.com/softerhardware/Hermes-Lite>  along with��PowerSDR mRX v3.3.9.0. With VAC1 configured and enabled Receive works perfect. However, on transmit there is no output from Microphone. Screenshot attached [������tx1.jpg <https://drive.google.com/file/d/0B-pIhFWStiaNSGRKVkx3WXhqTFk/view?usp=drive_web> ������������].

Test tone works and gives output on PS and from hardware[tx.png] <https://drive.google.com/file/d/0B-pIhFWStiaNdm4wNXIzaDVZdkE/view?usp=drive_web> .�� Same hardware and microphone setup works with another software (Spark SDR by Alan Hopper M0NNB��www.ihopper.org/radio) and there is good SSB output.


Screenshot of VAC1 configuration is also attached [config.jpg <https://drive.google.com/file/d/0B-pIhFWStiaNMkIyd1VjT001RjA/view?usp=drive_web> ].

Appreciate any suggestions or pointers to fix this issue.

73s
Amogh Desai - VU3DES
www.amoghdesai.com <http://www.amoghdesai.com/> 

���

 <https://drive.google.com/file/d/0B-pIhFWStiaNMkIyd1VjT001RjA/view?usp=drive_web> ��confi.JPG
������

 <https://drive.google.com/file/d/0B-pIhFWStiaNdm4wNXIzaDVZdkE/view?usp=drive_web> ��tx.png
������

 <https://drive.google.com/file/d/0B-pIhFWStiaNSGRKVkx3WXhqTFk/view?usp=drive_web> ��tx1.JPG
���

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20161122/e9880158/attachment.htm>