[hpsdr] Angelia_Protocol_2_v11.6/ANAN-100D firmware available for download

Robert Lorenzini bob at llorenzini.com
Mon Apr 24 14:02:13 PDT 2017


After programming the radio I lost discovery but P2 was up and running.
I found a conflict between VAC1 and VAC2. If both were enabled I had
no tx on VAC1. It looked like there were no dropouts on the Pi using WiFi
with P2. It has been years since I used the bootloader, I guess I will have
to find my jumper extender.

Bob - wd6dod

On 4/23/2017 7:00 PM, Joe Martin wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Actually, I see that you have to double-click on the filename to get the download button to appear.  This procedure isn’t difficult.  It will simply take some getting used to though as it is a little different from the previous SVN download procedures.
>
> 73, Joe K5SO
>
>> On Apr 23, 2017, at 7:41 PM, Joe Martin <k5so at k5so.com> wrote:
>>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> And for highly detail-oriented folks, I see that the file size for this particular firmaware version happens to be 1.32MB not 1.8MB so don’t get thrown by that nit.  Thanks!
>>
>> 73, Joe K5SO
>>
>>> On Apr 23, 2017, at 7:36 PM, Joe Martin <k5so at k5so.com> wrote:
>>>
>>> ***** High Performance Software Defined Radio Discussion List *****
>>>
>>> All,
>>>
>>> There appears to be some confusion.  The download button I refer to below is not the green “Clone or download” button you see on the top level of the OpenHPSDR-Firmware repository.  It is the button that appears after you select the Orion_Protocol_2_v11.6.rbf filename on the
>>>
>>> OpenHPSDR-Firmware > Protocol 2 > Angelia (ANAN-100D)  page.
>>>
>>> If you select the green button on the top level of the OpenHPSDR-Firmware page you will download the entire OpenHPSDR-Firmware repository, which is not what you want to do if you wish to obtain only the 1.8 MB Orion_Protocol_2_v11.6.rbf file.
>>>
>>> 73, Joe K5SO
>>>
>>>
>>>> On Apr 23, 2017, at 6:02 PM, Joe Martin <k5so at k5so.com> wrote:
>>>>
>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>
>>>> All.
>>>>
>>>> New firmware for Angelia/ANAN-100D Protocol 2 is available for download from
>>>>
>>>> http://github.com/TAPR/OpenHPSDR-Firmware
>>>>
>>>> Be sure to use the DOWNLOAD button on the web page to obtain the download; do NOT double-click on the file name nor right-click “Save As” to download the file as doing either of these latter two actions will not download the 1.8MB file.
>>>>
>>>> This firmware must be used with Thetis or other Protocol 2 software; not PowerSDR (which requires Protocol 1).
>>>>
>>>> This version adds peak detection to FWD_PWR (AIN1) and REV_PWR (AIN2) and speeds up user ADC conversion rates x10. It also modifies the PHY Rx clock skew timing to (hopefully) allow use of the firmware on more ANAN-100D radios with less undesirable unit-specific behavior.  The version also fixes the external PTT IN feature (pin 13 on the accessory jack of the ANAN-100D).
>>>>
>>>> 73, Joe K5SO
>>>>
>>>> _______________________________________________
>>>> HPSDR Discussion List
>>>> To post msg: hpsdr at openhpsdr.org
>>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>>>> HPSDR web page: http://openhpsdr.org
>>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>> _______________________________________________
>>> HPSDR Discussion List
>>> To post msg: hpsdr at openhpsdr.org
>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>>> HPSDR web page: http://openhpsdr.org
>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



More information about the Hpsdr mailing list