[hpsdr] piHPSDR release v1.1.0-beta

[Scott Traurig]

Sweet! Looking forward to it!

Thanks, John!

Scott/w-u-2-o

On Mon, Feb 13, 2017 at 6:41 AM, John Melton <john.d.melton at googlemail.com>
wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
>
> I have pushed release v1.1.0-beta to github and it is now available for
> download.
>
> This are significant changes to the existing piHPSDR software.  The major
> changes include:
>
> 2 Receiver support
> Split mode operation (VFO-A and VFO-B)
> Support for both original and new protocols and also USB support of Ozy
> based ATLAS systems.
> Support for DLE8000 dual filters.
> TCP/IP Cat interface (3 ports) emulating the TS-2000 command set.
>
> Please be aware that when running 2 receivers at 192000 samples per second
> the Raspberry Pi 3 starts to run hot, which is shown on the screen as a
> thermometer appearing on the top right of the display. I have found that
> putting a small heat sink on the processor chip resolves the problem.
>
> Also note that this build does not include FreeDV or PSK modes. It is
> still in the source but needs some work after all the changes.
>
> To install this release follow the install instructions which can be
> downloaded from:
>
>   https://github.com/g0orx/pihpsdr/blob/master/release/
> documentation/pihpsdr-install.pdf
>
> A preliminary user manual can be downloaded from:
>
>   https://github.com/g0orx/pihpsdr/blob/master/release/
> documentation/piHPSDR-Controller-Users-Guide-v1.1.0.pdf
>
> 73,
>
> John g0orx/n6lyt
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/
> listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20170213/3d778186/attachment.htm>