[hpsdr] Munin parts question

[Dan Mitchell]

Bob;
I think R8 on the BOM may be a misprint; wattage seems to be inadequate on
the BOM when compared to the schematic.
73,
Dan, W0IQ

On Wed, Jan 10, 2018 at 11:42 AM, rwfish . <rwfish56 at gmail.com> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
>
> Hi,
>
> I am putting together a parts order for a Munin lll build and in the
> process I am comparing the Munin lll BOM to the Munin 2 BOM (because the
> Munin 2 BOM has part numbers).
> The component reference numbers are different, but it isn't too difficult
> to cross-reference the part in a similar location on the Munin 2 schematic
> and find it on the Munin 2 BOM.
>
> Which brings me to my question. I am ordering the two capacitors C2, C26
> (on the Munin 3 schematic & BOM) the value called out is 10uf. The
> capacitors in a similar place on the Munin 2 schematic
> C35, C37 are listed as 10N. Is this just a typo or are they intended to be
> 10uf on the Munin 3?
>
> It probably doesn't matter, I think they are just there to remove noise
> from the gate bias circuits.Also, I have both parts here already, so I
> won't have to order them unless I am out. I just thought I would bring it
> up in case it's a typo.
>
> Thanks & 73,
>
> Bob  K6GGO
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/
> listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20180110/d40dc000/attachment.html>