[hpsdr] Hermes and protocol 2

[Bob Stricklin]

Hi Kjell,

I did test my Hermes board today on transmit and everything seems to be working fine. I did see some issues getting Thetis to talk to the board initially but after a bit this smoothed out and I saw no missed packets or other issues.

I am using:

Windows 10 
Thetis v2.6.8(11/3/19)
Hermes Firmware  Hermes_Protocol_2_v10.7.rbf

i measured the Power output on all bands into a 50 ohm load at:

6m		14.9 dBm
10m		27.9 dBm
12m		28.25 dBm
15m		28.84 dBm
17m		28.23 dBm
20m		28.00 dBm
30m		27.42 dBm
40m		26.90 dBm
60m		26.70 dBm
80m		26.50 dBm
160m	26.08 dBm


Bob  N5BRG