[hpsdr] Thetis v2.8.11 with Hermes.

Kjell Karlsen la2ni at online.no
Sun Nov 8 06:31:21 PST 2020


Hi Martin.

I discovered the  high power indicated  problem earlier today and was 
going to mention it! So now I hope it is solved soon.

73, Kjell

Den 08.11.2020 15:15, skrev Helmut Oeller:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> Hallo Martin,
>
> no new finding, but not less annoying and/or confusing. I think the 
> bug will be deleted soon. BTW, this time I used Thetis only under 
> protocol 1. No knowledge if this issue also exists under protocol 2 mode.
>
> Take it easy as Hermes will NEVER deliver 35 or 40 watts, hi.
>
> 73, Helmut, DC6NY
>
>
>
> Am 08.11.2020 um 13:42 schrieb Martin Emmerson:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>>
>> Has anyone, using this combination, noticed that on TX the Thetis Fwd 
>> Pwr shows about 35W?
>> This is with the General -> H/W Select -> Hardware - Alex box 
>> unticked so this should not
>> happen.
>> Also get over SWR warnings which can be stopped by unticking SWR 
>> protection in the Alex
>> tab but Alex should not be active with its box unticked?
>> After some investigation I found the following line of code in setup.cs:
>> //    console.AlexPresent = chkAlexPresent.Checked;
>> Removing the "//" from the start of the line and recompiling the code 
>> has resolved the problem!
>> I cannot see any reason this line has been commented out? as the 
>> checkbox is there to
>> enable/disable Alex.
>> I realise that most people won't notice this, especially those that 
>> have Alex or equivalent.
>> However a friend G3KOM who is going to use his Hermes to drive a 2m 
>> transverter was rather
>> concerned about this erroneous power output reading...
>>
>> I wonder if anyone can tell me why the Alex tickbox has been rendered 
>> inactive?
>>
>> Thanks
>>
>> Martin G3OQD.
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg:hpsdr at openhpsdr.org
>> Subscription help:http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page:http://openhpsdr.org
>> Archives:http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20201108/a64cfcbc/attachment.html>


More information about the Hpsdr mailing list