[hpsdr] Excalibur checkout

[Alberto I2PHD]

Graham / KE9H wrote:
> I had reports from several users that the "Phase
> Display" built into PowerSDR could be used to
> set/check the frequency of the TCXO in the absence of
> a local 10 MHz standard or GPSDO.
>   
Another possibility could be to use the Phase display of Winrad, when 
set to ECSS mode.



It will hunt the carrier received, setting the frequency and phase of 
the internal NCO so that the phase error will be zero.
You can then read the actual frequency on the "Tune" display, and see if 
there are instantaneous deviations
maybe due to ionospheric propagation.

73  Alberto  I2PHD

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20100111/dc50e67f/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: moz-screenshot-33.jpg
Type: image/jpeg
Size: 2588 bytes
Desc: not available
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20100111/dc50e67f/attachment-0004.jpg>