[hpsdr] Hermes and Angelia on same net

[Alfred Green]

On 12/9/2013 10:42 PM, Brian Lloyd wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
>
> I have both a Hermes board and an Angelia board on the same network at 
> the same time. I would like to start two instances of PowerSDR, one 
> for each radio, at the same time. Both radios are assigned fixed but 
> different addresses. (I am using DHCP but have my DHCP server 
> configured to always assign the Hermes board and the Angelia board a 
> fixed address.)
>
> Any suggestions?
>
>

I don't (yet) have an Angelia, but I regularly use both my Hermes and 
Metis-based OpenHPSDR systems at the same time. Unless Angelia looks 
radically different from a Metis you should have no problem.
I usually use PSDR mRx v3.1.5 with either, but often run a home-built 
application based on KissKonsole. The software can be on different PCs 
on my LAN, or will run fine on the same machine. I fact, I can run PSDR 
v2.6.4 with my Flex-3000 on the same machine with no issues, except for 
visual confusion.
My boxen all use DHCP.

Hope that helps.

73  Alf  NU8I
Phoenix  AZ  DM33xo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20131209/5dfcdbe9/attachment-0004.htm>