[hpsdr] Angelia_v2.0 firmware and new output_file.pof file

[Michael St. Angelo]

Clyde,

My Ethernet jack on my 100D fits snugly in my front panet. I'll have to go
via the rear vent hole route.

Mike N2MS

-----Original Message-----
From: Clyde Washburn [mailto:k2ue at rochester.rr.com] 
Sent: Tuesday, September 17, 2013 11:28 AM
To: 'Joe Martin K5SO'; mstangelo at comcast.net
Cc: 'hpsdr list'
Subject: RE: [hpsdr] Angelia_v2.0 firmware and new output_file.pof file

There is room just to the right of the Ethernet jack on the anan-100d front
panel to install a small toggle switch to jumper j17 without opening the
unit -- that was my solution.

Clyde, K2UE

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Joe Martin K5SO
Sent: Tuesday, September 17, 2013 7:59 AM
To: mstangelo at comcast.net
Cc: hpsdr list
Subject: Re: [hpsdr] Angelia_v2.0 firmware and new output_file.pof file

***** High Performance Software Defined Radio Discussion List *****

Hi Mike, 

Sorry to hear you're having trouble.  Here are my suggestions: 

1) Run the HPSDSRProgrammer program, under Device select "Hermes", then
click on the "Hermes Bootloader" tab. 

2) Browse to the Angelia_v2.0.rbf file (there is no .rtf file).  

3) After putting J17 on your Angelia board, power cycle the Angelia board to
ensure that things come up properly for programing the EEPROM (ethernet
cable connected, of course). 

4) Click on "Program"

I like your idea of extending the J17 jumper connection on the ANAN-100D.  I
use a standalone Angelia board here so access isn't a problem for me but I'd
certainly extend the connection if I had an ANAN-100D.

If these steps don't work for you I suggest that we work together via direct
email (off reflector) so that we will be able to pass screen shots to each
other.  That way perhaps we can more easily find out what's going on with
your particular system.  

73,  Joe K5SO


_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1379867345.0