[hpsdr] 10/12m coil windings (Re: Angelia_v4.2 firmware release)

[Abhi A]

Oops I might as well be on a different planet :), sorry my previous post
was not relevant to your query,,

If you are getting 100Ws on 10M you are OK, the 10M low power did not
effect all radios some radios had low output on 10M this was due to the
variance in board capacitance from lot to lot which is quite typical in FR4
material, however, we did make a change to the 10M LPF coils in order to
prevent this,

73s,
Abhi

On Monday, August 25, 2014, k3it <gokoyev+k3it at gmail.com> wrote:

> Is there an easy way to identify which radios need a correction for 10/12m
> coils?
>
> Vasiliy
>
>
> On Sun, Aug 24, 2014 at 9:43 AM, Joe Martin K5SO <k5so at valornet.com
> <javascript:_e(%7B%7D,'cvml','k5so at valornet.com');>> wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> > The short answer is yes, but if you happen to have an ANAN-series radio
>> that has incorrect number of windings on the 10/12m filter toroids you will
>> experience low output power on 10m.
>>
>>
>> Excuse me.  A more accurate statement would’ve been:
>>
>> "The short answer is yes, but if you happen to have an ANAN-series radio
>> that has incorrect number of windings on the 10/12m filter toroids you will
>> experience a lower maximum output power on 10m than you will if the
>> windings are correct.”
>>
>> 73, Joe K5SO
>>
>>
>> On Aug 24, 2014, at 7:30 AM, Joe Martin K5SO wrote:
>>
>> > ***** High Performance Software Defined Radio Discussion List *****
>> >
>> > Hi Brian,
>> >
>> > The short answer is yes, but if you happen to have an ANAN-series radio
>> that has incorrect number of windings on the 10/12m filter toroids you will
>> experience low output power on 10m.
>> >
>> > The firmware uses correct switch-point frequencies for the Alex filter
>> set, which is also the correct switch-point frequencies for the ANAN-series
>> radios that have the correct windings on their filters.  It is my
>> understanding that later versions of the ANAN series radios use correct
>> windings on their 10/12m filters so their switch points should be identical
>> to those in Alex.  Earlier versions of the ANAN series radios do not.
>> >
>> > The firmware “patch” used initially by Abhi to correct the 10m low
>> power output for some ANAN series radios is not the ideal method for
>> correcting the issue of low power output on 10m on those earlier ANAN
>> radios, as the issue is actually a hardware issue, not a firmware or
>> software issue.  If Abhi wishes to create a version of firmware that uses
>> different switch points from Alex that’s his prerogative but you should be
>> aware that the issue is not actually a firmware issue, it’s a hardware
>> issue.
>> >
>> > The fact is that there should be only a single firmware version to use
>> with each of the Hermes, Angelia, and Orion boards, respectively,
>> regardless of whether the board are used in an ANAN-series configuration
>> with the Apache Labs filters or in a stand alone configuration using Alex
>> filters.  The "correct fix” for ANAN radios that have the low power output
>> issue on 10m is to rewind the filter toroids for the 10/12 m filters on
>> those radios, not to patch the firmware or software to use switch points
>> that are different from the Alex filter design.
>> >
>> >
>> > 73, Joe K5SO
>> >
>> > On Aug 24, 2014, at 6:38 AM, Brian D wrote:
>> >
>> >> Joe Martin K5SO <k5so at valornet.com
>> <javascript:_e(%7B%7D,'cvml','k5so at valornet.com');>> wrote:
>> >>
>> >>> ***** High Performance Software Defined Radio Discussion List *****
>> >>>
>> >>> All,
>> >>>
>> >>> Angelia_v4.2 firmware is available for download from
>> >>>
>> >>> http://k5so.com/HPSDR_downloads.html
>> >>>
>> >> Is this suitable for use in the ANAN range of tranceivers or does it
>> need to
>> >> be changed by Abhi for the different filter frequencies?
>> >>
>> >> --
>> >> Brian D
>> >> G3VGZ
>> >>
>> >> ---
>> >> This email is free from viruses and malware because avast! Antivirus
>> protection is active.
>> >> http://www.avast.com
>> >>
>> >
>> > _______________________________________________
>> > HPSDR Discussion List
>> > To post msg: hpsdr at openhpsdr.org
>> <javascript:_e(%7B%7D,'cvml','hpsdr at openhpsdr.org');>
>> > Subscription help:
>> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> > HPSDR web page: http://openhpsdr.org
>> > Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> <javascript:_e(%7B%7D,'cvml','hpsdr at openhpsdr.org');>
>> Subscription help:
>> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20140825/56965323/attachment-0003.htm>