[hpsdr] piHPSDR release v1.1.0-beta

[John Melton]

Hi Kjell,

Thanks for the update.  Originally I only allowed one noise function active
but decided to allow any combination. At high sample rates it does start to
suffer.

This is still only a beta release so hopefully I can get some time to
improve the performance. I still need to port the latest wdsp to be able to
use the low latency filters. My initial look at showed that some new
Windows muted and thread functions were being used that needed some thought.

I have done some tests with APOLLO but let me know if you have any problems.

-- John

On 13 Feb 2017 21:03, "Kjell Karlsen" <la2ni at online.no> wrote:

> Hi John.
>
> Thank you for the update of PiHPSDR!
>
> For a long time I have not had time to follow and test the Beta versions
> but now I have decided to take e look at it. I use the ANAN-200 for
> testing. I had to take Hermes and Apollo out of the box I had with me to
> Fr.hafen but I am going to install them back together with PiHPSDR soon.
> Now the PiHPSDR controller is so good that I might use it as my main
> portable rig!
>
> So far it seems to be fine. I tested the transmitter part of it and I can
> not see any significant delay from I talk and till the RF is going out. And
> the reports I get are very good. I have not tested with 2 receivers so far.
>
> I had to swap the outputs from the main encoder to get the tuning right.
>
> I really like the possibility to use all 3 small encoders for different
> functions. That is perfect.
>
> I had one problem after I selected both NR2 and SNB. I also used 192 KHz
> sampling rate as far as I remember. It worked for some time but after a
> while the GUI stopped working. The RX still worked but it was impossible to
> use anything on the controller. I had to remove the power to stop all
> working. After that, when starting, I could hear the RX working but the
> display did not come fully up, only part of it was shown and I had no
> control of anything.
>
> The solution for me was to delete the pihpsdr directory and extract the
> pihpsdr.tar file again and run install.sh. Then everything worked fine
> after a new generation of the wisdom file. I´ll try to avoid using so much
> processing power!
>
> Very good work, John!
>
> 73, Kjell
>
>
>
> På Mon, 13 Feb 2017 12:41:23 +0100, skrev John Melton <
> john.d.melton at googlemail.com>:
>
> ***** High Performance Software Defined Radio Discussion List *****
>>
>>
>
> --
> Sendt med Operas e-postklient: http://www.opera.com/mail/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20170213/9d4611cc/attachment.htm>